Oha, such construction projects also exist!

The Antaris 5.5 kW with the repeller D4.40 m installed in Bavaria.

Yes, the Bavarians are sticking to it!

Here the Antaris 5.5 kW with the larger repeller D5.30 m on a customer-owned (joinery) wooden mast.

Somehow it is always the same and yet each BV has its own character!

Here, the Antaris 7.5 kW is installed on a 9.20 m tilt mast in northern Germany.

The year begins in Lower Saxony with the erection of the Antaris 7.5kW on a 12m tipping mast, This means that this is a traversing-free BV with a total height of up to 15m.

Mounting Antaris 12 kW in Schleswig-Holstein!

The Antaris 12 kW is installed here on a 24m tilting mast.

And on it goes in Schleswig Holstein.......!

Here the Antaris 5.5 kW with the customer's own mast.

In Lower Saxony we are now busy installing!

Now that in Lower Saxony wind turbines up to 15m can be erected without a procedure (from 01.01.2022 in outdoor areas), one installation after the other is taking place......

Here the Antaris 5.5 kW in BW!

The wind turbine is installed on a customer-owned lattice mast with a hub height of 10 m, without any procedures in BW.

The Antaris 12 kW in Vietnam

Antaris wind turbines are "Made in Germany" and are installed worldwide.

The Antaris 3.5 kW on a guyed tubular mast!

Yes, even the small systems of the ANTARIS series make their contribution to the energy transition.

Mounting structure Antaris 7.5 kW!

Here the Antaris 7.5 kW works 3-phase parallel to the mains up to the set 4.0 kW.

The Antaris 4.5 kW as 48 VDC battery charger!

The wind turbine is located on a 7.0 m tilt mast and is therefore a procedure-free construction project in Northrhine-Westphalia, Germany.

The Antaris 3.5 kW in a hybrid system

The Antaris wind turbine works here on a 9.20m mast in a hybrid system with a PV system.

The Antaris 5.5 kW in Sweden, near Malmö!

The system works here on a 12m high wooden mast "Dali Performance" from the company Innoventum from Sweden https://www.innoventum.se/.

The Antaris wind turbines in Russia!

Here 2 pcs. Antaris 4.5 kW 48V DC in the Russian ALTEI mountains.

The Antaris 5.5 kW in Brittany!

The wind turbine is mounted on a 12m high wooden mast "Dali Performance" by Innoventum from Sweden https://www.innoventum.se/.

Here, the Antaris wind turbine on a 12 m high tilt mast works 3-phase parallel to the grid for its own electricity supply and for heating support with a 6.0 kW heating rod.

The Antaris 12 kW in the district of Borken!

The existing wind turbine was dismantled here and replaced by the Antaris 12 kW.

The Antaris 3.5 kW in Sweden!

Here the Antaris 3.5 kW is working on a 12m high wooden mast "Dali Performance" installed in Sweden.

The Antaris 2.5 kW installed in Belgium!

Even in times of a pandemic, the Antaris wind turbines continue to be installed.

The Antaris 7.5 kW in Northern France!

Here, the Antaris 7.5 kW was erected on an 11m high tipping mast.

The ANTARIS 5.5 kW in Baden-Württemberg!

Here the ANTARIS 5.5 kW was built on a 9.2m high tilting mast and is therefore free of any procedure in BW (no approval required for hub heights up to 10m).

The Antaris 5.5 kW in Jülich

The Research Centre Jülich ( https://www.fz-juelich.de/portal/DE/zentrum/_node.html ) has now erected its Antaris 5.5 kW / D4.40m on a 24m high mast.

The Antaris installed, somewhere in eastern Russia!

The Antaris 4.5 kW works here as a 48V DC battery charger in a remote region in the Altai mountains.

Wind and solar power with unmistakable design in Austria!

The Antaris wind turbine is installed here on a 12m high wooden mast (Giraffe 2.0) and works in a hybrid system with 8.0 kW solar.

The Antaris 3.5 kW in Schleswig-Holstein!

The Antaris was installed here on a 7.0m tilt mast and is therefore free of movement. With the ABB-UNO-3.3-TL the wind turbine works 1-phase (230V AC) parallel to the grid.

Here the Antaris 12 kW works on a 30m high tubular mast in Bavaria. These masts are specially manufactured for hilly inland locations, such as in Bavaria. The mast statics and the foundation plan both contain verifiable documents.

The Antaris 7.5 kW in Hesse/Germany!

The Antaris wind turbine works here on a 24m mast, 3-phase parallel to the grid and with heating support.

The Antaris 5.5 kW in northern Germany

The Antaris wind turbine is installed here on a 9.20m tilting mast.

ANTARIS wind turbines and the madness of authorities!

Demands were made on this building project: