News Release from BRAUN Windturbinen GmbH
Wind Industry Profile of
The Antaris 12 kW in Lower Saxony!
In addition, a 6.0 kW heating rod is installed here for heating support. The SW10 controls the system via a characteristic curve. A building permit was not required here, as there is freedom of procedure in NS up to 15 m total height. A so-called building notification was made, including submission of our static mast and foundation plans.
The wind sensor, which is installed on the mast, is used to switch off the wind via Smart!wind using 12 kW braking resistors.
The generator for the Antaris 12 kW is the CK18, which is 100% overload capable! Quality "Made in Germany".
The installation was done by the customer himself. Respect and recognition for this.
If you have any questions about the project, please contact us, we will be happy to advise you.
Enjoy the wind with Antaris wind turbines.
- Source:
- BRAUN Windturbinen
- Author:
- Press Office
- Link:
- www.braun-windturbinen.com/...
- Keywords:
- Braun Windturbinen, small wind, Antaris, wind turbine, kW, Lower Saxony, Germany, installation, tower, Mast, procedure
All news from BRAUN Windturbinen GmbH
news in archive
Related News
