Installation of the Antaris 5.5 kW in Lower Saxony!

The wind turbine could be erected without any procedures, as no building permit is required in NS up to 15m total height (repeller blade upright). The Antaris 5.5 works 3-phase parallel to the grid with the FIMER TRIO 5.8 kW.

Due to the rather low mast height, the repeller D4.40m was installed here. The wind is monitored via a wind sensor installed on the mast and a PLC installed in the cabinet. Additional safety parameters are a V DC voltage monitoring and the helicopter function.

The wooden mast was manufactured here: https://innoventum.se/dali-performance/

If you have any questions about the project, please contact us, we will be happy to advise you.

Enjoy the wind with Antaris wind turbines!