The Antaris 2.5 kW installed in Belgium!

Even in times of a pandemic, the Antaris wind turbines continue to be installed.

The Antaris 7.5 kW in Northern France!

Here, the Antaris 7.5 kW was erected on an 11m high tipping mast.

The ANTARIS 5.5 kW in Baden-Württemberg!

Here the ANTARIS 5.5 kW was built on a 9.2m high tilting mast and is therefore free of any procedure in BW (no approval required for hub heights up to 10m).

The Antaris 5.5 kW in Jülich

The Research Centre Jülich ( https://www.fz-juelich.de/portal/DE/zentrum/_node.html ) has now erected its Antaris 5.5 kW / D4.40m on a 24m high mast.

The Antaris installed, somewhere in eastern Russia!

The Antaris 4.5 kW works here as a 48V DC battery charger in a remote region in the Altai mountains.

Wind and solar power with unmistakable design in Austria!

The Antaris wind turbine is installed here on a 12m high wooden mast (Giraffe 2.0) and works in a hybrid system with 8.0 kW solar.

The Antaris 3.5 kW in Schleswig-Holstein!

The Antaris was installed here on a 7.0m tilt mast and is therefore free of movement. With the ABB-UNO-3.3-TL the wind turbine works 1-phase (230V AC) parallel to the grid.

Here the Antaris 12 kW works on a 30m high tubular mast in Bavaria. These masts are specially manufactured for hilly inland locations, such as in Bavaria. The mast statics and the foundation plan both contain verifiable documents.

The Antaris 7.5 kW in Hesse/Germany!

The Antaris wind turbine works here on a 24m mast, 3-phase parallel to the grid and with heating support.

The Antaris 5.5 kW in northern Germany

The Antaris wind turbine is installed here on a 9.20m tilting mast.

ANTARIS wind turbines and the madness of authorities!

Demands were made on this building project:

The Antaris 12.0 kW in France

The turbine works here near the French Atlantic coast on an 11m high tilting mast.

The Antaris 5.5 kW in Baden-Württemberg!

The Antaris 5.5kW stands here on a 9.20m high mast.

The summer break is over again!

The Antaris 3.5 kW will be installed on a 12m lattice tower.

The Antaris 7.5 kW in France

The wind turbine here works on a customer-owned mast on which another small wind turbine was previously mounted.

Also in the Allgäu one is happy about the Antaris wind turbines!

The Antaris 10 kW was built on a 15m mast.

The Antaris 5.5 kW, spoiled by the sun!

On Sicily the Antaris 5.5 kW works on a 15m high lattice mast.

The Antaris 2.5 kW in the USA!

The Antaris 2.5 kW works here in Illinois USA at 33m hub height.

Installation of the Antaris at a height of over 5,000m!

2 pcs. Antaris wind turbines 2.5 kW serve as electricity supplier for the ALMA project in Chile.

Installation of an ANTARIS-windturbine on the French west coast!

The Antaris 10kW works on a 18m tower only 1km away from the Atlantic Ocean.

As spring approaches, the first Antaris wind turbines will be installed

The Antaris 7.5 kW was installed here on a customer's own 20m mast. The turbine works a 3-phase grid-feed-in and with a heating-rod of 6 KW

The Antaris 2.5 kW in Spitsbergen!

The Antaris wind turbine here supplies the shown station with energy in the hybrid system with PV.

A happy new year and all the best for 2019 wishes you BRAUN Windturbinen GmbH!

Below the yield overview 2018 of 3 pcs. (2x10 kW, 1x7.5 kW) Antaris wind turbines!

Christmas greetings from Hungary!

The Antaris 5.5 kW works here on a 20m high mast in Hungary and supplies the farm of a family there.

In Switzerland too, people are looking forward to wind power!

The Antaris 5.5 works here on a 18m high mast and supplies the farm with clean wind.

Even in Franconia you use the wind to generate electricity!

The Antaris 7.5 kW delivers clean wind power here on a 21m high mast.

The Tour du Midi is looking forward to the Antaris Wind Turbine

In a strict public tendering process, Belgium decided to use the Antaris wind turbine.

Interview with Rüdiger Braun, Technical Director of BRAUN Windturbinen GmbH

Manufacturer and distributor of small wind turbines.

New at windfair.net: Braun - Windturbinen GmbH

Manufacturers and Distributors of small Wind Turbines