The Antaris 2.5 kW installed in Belgium!

This time in Belgium, on a 12m tilt mast. Here, the turbine operates 1-phase grid-parallel with an ABB-UNO-3.3 wind inverter.
The photos show the wind inverter with braking resistor and an additional "stop switch" (generator short circuit).
The inverter receives the programmed characteristic curve via the controller installed in the control cabinet.
Wind monitoring is carried out via a programmable PLC.

The system was installed by our local partner, https://www.ewsenergy.be/.
Congratulations to Mr. Croes for the successful installation.

If you have any questions about the project, please call here!