The Antaris 7.5 kW in Hesse/Germany!

Here, 3.0 kW are adjusted to the house network, then to the 6.0 kW heating rod in the service water tank. System manager here is the Smart!wind SW7.5; https://www.braun-windturbinen.com/produkte/wind-wechselrichter/
Assembly and erection was completely taken over by the customer himself, respect and appreciation for this! The individual foundation with special dimensions and reinforcement as well as the 24m masts for wind zone 4 were approved by the test structural engineer.

In order to reduce the mast noises, all of them have welded gusset plates at certain points inside, which reduces the shell vibration of the mast. Furthermore, the wall thickness of the mast is 1mm thicker than statically necessary, which also further reduces the mast noise.

Quality "Made in Germany"!

If you have any questions about the project, please call us!

Enjoy the wind with ANTARIS wind turbines.