2024-12-23

https://w3.windfair.net/wind-energy/pr/34719-antaris-bavaria-mast-grid-small-wind-inland-turbine-braun-windturbinen

News Release from BRAUN Windturbinen GmbH

Wind Industry Profile of

BRAUN Windturbinen GmbH

06/10/2020

The Antaris 12 kW wind turbine on 30m!

Here the Antaris 12 kW works on a 30m high tubular mast in Bavaria. These masts are specially manufactured for hilly inland locations, such as in Bavaria. The mast statics and the foundation plan both contain verifiable documents.

The plant works here 3-phase grid parallel with the Smart!wind SW10. Excess energy is dissipated via 2 pcs. 6.0 kW braking resistors each.
The following parameters are monitored for system safety: V DC, RPM, wind speed. In addition, the Antaris wind turbine is shut down completely via a "Braking Box" during the switch-off or braking process after reaching 50rpm. This prevents a restart in braking mode, e.g. in the event of a hurricane.

The system was installed electrically by the company Elektro Ecker in Landshut; https://www.elektroecker.de/

The installation of the system and the mast was done by the customer himself, respect and recognition for this.

If you have any questions about the project, please call us!

Enjoy the wind with ANTARIS wind turbines.