BRAUN Windturbinen: Here is another installation in Lower Saxony!

The Antaris 7.5 kW is installed here on a 12m tilting mast.
The wind turbine works with the TRIO 7.5 from FIMER 3-phase grid-parallel.
Wind monitoring via PLC, as well as V DC monitoring and helicopter function keep the Antaris safely in the wind even in heavy storms.
The CK11 generator (11.0 kW) performs the braking function.
Grid surplus can be dissipated via various smart monitoring systems, e.g. into domestic hot water.
Excess energy >7.5 kW is converted into heat and dissipated via the 6.5 kW braking resistor.
Please do not install this on a flammable surface!

Even if no soil expertise is required for the procedural freedom, here again is our recommendation to all future ‘ANTARIS wind millers’:
If the ground conditions are unclear, always have them checked for safety reasons.
The local civil engineer may also be able to do this! 

If you have any questions about the project, please contact us, we will be happy to advise you.

Enjoy the wind with Antaris wind turbines!