News Release from Aalberts Surface Treatment GmbH
Wind Industry Profile of
12/15/2010
New plant for the hardanodising of large Aluminium parts
At our site in Kerpen, Germany, we have commissioned a new plant designed for the coating of large Aluminium parts up to a length of 7 metres, using our HART-COAT® process. During this hard anodising process a protective Aluminium Oxide layer is produced on the surfaces of workpieces making it possible for a wide range of components to be protected e.g. against wear and corrosion. Nearly all commonly used wrought, cast and diecast alloys based on Aluminium can be treated by HART-COAT®.
In the new plant rollers, profiles, tubes, special tools or other large parts can be treated. The key precondition is that they do not exceed the following dimensions:
Length: 7,700 mm, width: 1,200 mm and height: 2,000 mm
The maximum weight of parts that can be carried amounts to 5,000 kg.
If you are interested, please contact our plant in Kerpen:
AHC Oberflächentechnik GmbH
Boelckestraße 25 – 57
50171 Kerpen
Germany
info@ahc-surface.com
Phone: +49 2237 502-0
Fax: +49 2237 502-100
In the new plant rollers, profiles, tubes, special tools or other large parts can be treated. The key precondition is that they do not exceed the following dimensions:
Length: 7,700 mm, width: 1,200 mm and height: 2,000 mm
The maximum weight of parts that can be carried amounts to 5,000 kg.
If you are interested, please contact our plant in Kerpen:
AHC Oberflächentechnik GmbH
Boelckestraße 25 – 57
50171 Kerpen
Germany
info@ahc-surface.com
Phone: +49 2237 502-0
Fax: +49 2237 502-100
- Source:
- AHC Oberflächentechnik GmbH
- Author:
- Jürgen Diesing
- Email:
- juergen.diesing@ahc-surface.com
- Link:
- www.ahc-surface.com/...